Swarm drone light show software download,
For more information on “ROPPOR Art Swarm Drone Light Show of 5 samples”, you can check out the video on the YouTube channel below.
Collision and speed check of swarm drone performance of ROPPOR Art(1)
Here is the manufacturing mechanism.
① Click New file
② Delete the existing contents by clicking New file and copy & paste the contents of the script file written on the notepad.
③ Modify and use the numbers in the blue box
④ Click Execute in the lower right corner to extract the result value to the Console.
⑤ Review the extracted result value and modify the performance formation
⑥ Completed when the phrase Total ~~~ Count = 0 is finally displayed during execution. (Crash, speed check)
This is a window that displays the result value when you click the Execute button at the bottom right of the Script Manager. Edit the file by viewing the results displayed here.
◎ How to interpret
Danger! Distance = 299.~ between 0 and 4 on xxxxF
d_treshold = If you enter a value of 300 = 299.~cm away Drone 0 and Drone 4 are in the xxxx frame.
*Go to the frame and correct the drone’s movement.
speed_treshold = If you enter 3 value, it catches drones exceeding 3m/s. (If you input 4, it would be 4m/s, right?)
*Chemessen thinks 3m/s as the maximum speed of the drone and works.
*As all drones have different specifications, the maximum speed is applied according to the situation.
By adjusting the position of the sphere and the key frame, the ‘Total Distance Danger! Count = 0’‘Total Danger! It is verified until Count = 0’ is extracted.
If you’re a first time maker, this can be very boring, but be patient!
After completing collision and speed verification, to apply to ROPPOR, you need to use path file extraction (3. PathGenerate) script. But we haven’t specified the LED color yet, so let’s create the LED first and finally extract the path file!